Description
1 Overview
- The SOM-ET6ULL BB is a baseboard that designed by Emtop tech for the SOM board SOM-ET6ULL.
- It features a lot of rich and flexible interfaces Can be used for the customers to develop their user programs, verify their expected functions and shorten product development cycle.
- The optional that with a box that can be used directly by the customer, or they can be customized a box and used this Kit directly for the productions.
2 Specification
Electrical Parameters
- Working Temperature:0°C~ 70°C(Commercial)
- -45°C~ 85°C(Industrial)
- Ambient Humidity:20% ~ 90%,non-condensing
- Mechanical Dimensions:60mm x 27mm
- Power Input:5V,1.8V/3.3V
Processor
Feature | Details |
SOM-i.MX6ULL | |
Arm Cortex-A7 MPCore platform |
Single ARM Cortex-A7 MPCore, including:
• 32 KB L1 Instruction Cache • 32 KB L1 Data Cache • Media Processing Engine (MPE) Co-processor • General Interrupt Controller(GIC) • Global Timer • Snoop Control Unit • Target frequency of 528MHz |
Audio | • S/PDIF Input and Output
• SAI modules supporting I2S,AC97,TDM |
On-chip memory | • Boot ROM (96KB)
• Secure/non-secure RAM (32KB) |
Memory and storage | |
DDR SDRAM |
• 512MB DDR3 SDRAM (16-bit bus width)
• Maximum 1GB support • 800MHz maximum DDR clock |
eMMC
|
• 4GB eMMC flash memory default
• 8-bits MMC mode • 4~32GB storage option • Nand or eMMC + SPI option • 256MB ~ 4GB storage option |
Expandable flash (MicroSD) | • Meets SD/SDIO 3.0 standard Runs at 4-bits
• Supports system boot from SD card • Supports high-capacity SDXC card up to 2TB |
Network & Wireless | |
Ethernet | • 10/100 Mbps Ethernet Controller
• Up to 2 MAC (6G2, 6G3 Only) |
Hardware Interface | |
I/O connectivity |
• 5x UART
• 2x ENET • 1x SDIO • 1x JTAG • 10x GPIOs • 10x SNVS_TAMPER • 2x OTG |
Display Interfaces | • 24bits RGB LCD |
Camera | • 8Bit CSI |
3 Order Information
Part No. | Memory | Flash | Operating Temperature |
1K Units | MOQ |
SOM-IMX6ULL-E4C | 512MB | 4GB EMMC | 0-70° | USD 39 | 1 |
SOM-IMX6ULL-E4I | 512MB | 4GB EMMC | -45-80° | USD 49 | 1 |